Request for quote

Compact Portable Liquid Mass Flow Dosing System

Introduction

The CORI-FLOW™ product range offers true mass flow in a range from 50 g/h up to 600 kg/h. The compact mini CORI-FLOW™ Series are designed for capacities from 400 mg/h up to 30 kg/h. Both Coriolis flowmeter series can be combined with a micro annular gear pump, integrated in a compact portable housing with local operation and power supply, to provide a highly accurate and stable liquid mass flow dosage unit.

Compact Portable Liquid Dosing Systems

Each Compact Portable Liquid Dosing System consists of a Mass Flow Meter of the mini CORI-FLOW™ or CORI-FLOW™ series, a gear pump, an operation module and power supply, built together in a ½19" or 19" housing with carrying handle. The onboard PID-controller of the flow meter will be optimized for control of the gear pump and enables an immediate start of dosage after connecting power cable and fluid accessories. Just enter the desired flow at the operation module (or remotely by computer) and the compact unit will dose true mass flow, independent of e.g. ambient temperature and back pressure. Several models are available to cover wide flow control and pressure ranges, also for aggressive fluids.

Specifications

  • Flow ranges: 20 g/h…20 kg/h FS several models with different flow ranges: 0.2…200 g/h / 1…2000 g/h / 0.03…20 kg/h
  • Pressure range: 1.5…80 bard max (depending on pump type and fluid dynamic viscosity)
  • Temperature: 0…50 °C
  • Fluid connections: 1/8” OD compression type (other on request)
  • Electrical connections: sub-D9 for RS232 (for operation and configuration)
  • Local operation via Readout/Control-panel
  • Power: 110 Vac / 230 Vac

Alternative for HPLC pump with balance

Traditionally, dosage of mass flow is achieved by using a (HPLC) metering pump with a balance. The pump offers volumetric flow and the balance is used to measure the amount of liquid mass pumped in or out of a cup. Bronkhorst dosing units, however, offer continuous true mass flow and make the use of balances superfluous. This ideal combination enables savings in time, (raw fluid) material and equipment.

  • Features
  • Options
  • Documentation

Features

  • Complete modular, small sized, liquid dosing system, ideal for laboratory use or system integration
  • Gear pump directly controlled by mass flow meter with adjustable PID-controller via voltage output signal
  • Direct liquid true mass flow dosage (not volumetric)
  • High accuracy and stability (nearly pulse-free)
  • No balance required
  • Flow rate independent of back (process) pressure and temperature
  • No need to pressurize liquid source
  • Prevents gas bubbles in dosed liquid
  • Flow meter controlled pump provides long term accuracy
  • Integrated pump protected from running dry
  • Indication of:
    - measured value (direct or %) and setpoint
    - totalized flow; optional batch control and alarm functions
    - pressure (optional)
  • Desired flow to be set through:
    - Keyboard on operation module,
    - Analog 0…5(10) V / 0(4)...20 mA or
    - Digital communication by:
    RS232, PROFIBUS DP, DeviceNet™,
    Modbus-RTU or FLOW-BUS

Options

  • A pressure meter or controller can be added to the system to monitor and/or control/limit the pressure at the outlet.
  • Wetted parts in Hastelloy-C for flow meters and pumps (also inert pumps available in ceramic coated versions)

Leaflet

For more information see leaflet "Compact Dosing Systems"


Terug
Deel deze pagina: